[data]
instruments = LISA_A LISA_E LISA_T
trigger-time = 4800021.15572853
analysis-start-time = -4800021
analysis-end-time = 26735979
pad-data = 0
sample-rate = 0.2
fake-strain = LISA_A:analytical_psd_lisa_tdi_AE LISA_E:analytical_psd_lisa_tdi_AE LISA_T:analytical_psd_lisa_tdi_T
; fake-strain-extra-args = LISA_A:len_arm:2.5e9 LISA_A:acc_noise_level:2.4e-15 LISA_A:oms_noise_level:7.9e-12 LISA_A:tdi:1.5 LISA_E:len_arm:2.5e9 LISA_E:acc_noise_level:2.4e-15 LISA_E:oms_noise_level:7.9e-12 LISA_E:tdi:1.5 LISA_T:len_arm:2.5e9 LISA_T:acc_noise_level:2.4e-15 LISA_T:oms_noise_level:7.9e-12 LISA_T:tdi:1.5
fake-strain-extra-args = len_arm:2.5e9 acc_noise_level:2.4e-15 oms_noise_level:7.9e-12 tdi:1.5
fake-strain-seed = LISA_A:100 LISA_E:150 LISA_T:200
fake-strain-flow = 0.0001
fake-strain-sample-rate = 0.2
fake-strain-filter-duration = 31536000
psd-estimation = median-mean
psd-inverse-length = 267840
psd-segment-length = 267840
psd-segment-stride = 133920
psd-start-time = -4800021
psd-end-time = 26735979
channel-name = LISA_A:LISA_A LISA_E:LISA_E LISA_T:LISA_T
injection-file = injection_smbhb.hdf

[model]
name = relative
low-frequency-cutoff = 0.0001
high-frequency-cutoff = 0.1
epsilon = 0.01
mass1_ref = 1015522.4376
mass2_ref = 796849.1091
tc_ref = 4799624.274911478
spin1z_ref = 0.597755394865021
spin2z_ref = 0.36905807298613247

[variable_params]
mchirp =
q =
tc =

[static_params]
; Change it to "ref_frame = SSB", if you use SSB frame in injection file.
ref_frame = LISA
approximant = BBHX_PhenomD
; You can use "1.5" or "2.0" for TDI.
; Please use the same TDI version for PSD and injection file.
tdi = 1.5
coa_phase = 4.275929308696054
eclipticlongitude = 5.4431083771985165
eclipticlatitude = -1.2734504596198182
polarization = 0.22558110042980073
spin1z = 0.597755394865021
spin2z = 0.36905807298613247
distance = 17758.367941273442
inclination = 1.5970175301911231
t_obs_start = 31536000
f_lower = 1e-4
; Put LISA behind the Earth by ~20 degrees.
t_offset = 7365189.431698299

[prior-mchirp]
name = uniform
min-mchirp = 703772.7245316936
max-mchirp = 860166.6633165143

[prior-q]
name = uniform
min-q = 1.1469802543574181
max-q = 1.401864755325733

[prior-tc]
name = uniform
min-tc = 4798221.15572853
max-tc = 4801821.15572853

[waveform_transforms-mass1+mass2]
name = mchirp_q_to_mass1_mass2

[sampler]
name = dynesty
dlogz = 0.1
nlive = 150

; NOTE: While this example doesn't sample in polarization, if doing this we
; recommend the following transformation, and then sampling in this coordinate
;
; [waveform_transforms-polarization]
; name = custom
; inputs = better_pol, eclipticlongitude
; polarization = better_pol + eclipticlongitude